How to care for a freshly tinted car in the first week

Fresh tint looks finished the moment you drive away, but the film is still curing underneath. The adhesive needs about a week to fully bond and the trapped moisture from installation needs time to evaporate through the film. What you do in that first week decides whether the install stays perfect.

What is normal (do not panic)

• A slight haze or milky look on the glass. That is moisture curing out. It clears on its own.
• Small water pockets or tiny bubbles in the first few days. Also moisture. They disappear as the film dries.
• The film feeling slightly soft to a fingertip. The adhesive is still setting.

None of that is a defect. It is the install drying. If anything is still there after a couple of weeks, that is when you call us.

The one rule: leave the windows up

Do not roll the windows down for the first few days, ideally a few more if you can manage it. Rolling down a window before the adhesive has set can peel the film at the top edge or shift it. This is the single most common way a fresh tint gets damaged, and it is entirely avoidable.

Do not clean the inside yet

Leave the inside of the tinted glass alone for about a week. No glass cleaner, no wiping. When you do clean it, use a soft cloth and an ammonia-free cleaner, because ammonia degrades film over time. The outside of the glass you can wash normally.

The short version: windows up, hands off the inside glass, and let the haze clear on its own. A week of patience protects a finish that should last for years.

We hand every customer specific aftercare with the warranty. If something does not look right after the cure window, bring it back and we will sort it.